Two Zone Rotary CVD Tube Furnace. 1200℃ 4"Two Zone Rotary CVD Tube Furnace with Automatic Feeding & Receiving System OTF-1200X-4-R-II-AF is a two two zones rotary tube furnace with an automatic feeding & recieving mechanism. Automatic feeder controls the amount and distribution of the materials inside the tube
1400℃ STG Series products are mainly applied for the heat treatment of samples under vacuum or protective atmosphere, Quality SIC Rod is used for heating element, and the temperature controller uses microcomputer PID control module to achieve precise temperature control and constant temperature requirements.
1200ºC Max. Two Zone PECVD Tube Furnace (Optional Tube Dia) with Auto- Sliding. TMAX-DSP-1200PECVD is a dual zone slidable PE-CVD tube furnace system consists of RF plasma source, with tube size and an integrated slidable rail, precision mass flow meter with gas mixing tank, and a high-quality oil-less vacuum pump.
1200c High Temperature Two Zone Rotary Tube Furnace For Calcining Inorganic Compound, Find Complete Details about 1200c High Temperature Two Zone Rotary Tube Furnace For Calcining Inorganic Compound,Rotary Tube Furnace,Tube Furnace,Two Zone Rotary Tube Furnace from Laboratory Heating Equipments Supplier or Manufacturer-Zhengzhou Tainuo Film Materials Co., Ltd.
The split tube furnace range HST (single zone) and HZS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters.
Sentro Tech's 1700°C (3090°F) tube furnace suits laboratory and small-scale production applications that require extremely high and/or prolonged temperatures. With a full suite of standard features, this lab tube furnace can be fitted to suit your needs with customizable sizing and heating zone features.
Introduction of Tube Furnace: a dual zones tube furnace. Each heating zone is controlled by a precision 30 segments digital temperature controllers independently. So the tube furnace can create various thermal gradient by adjust two zone temperature.
The furnace includes three independent, programmable controllers, one for each zone. Features. Innovative use of venting and insulating air spaces to create lower exterior surface temperatures. Accepts an array of tube adapters. One set of (2) tube adapters included; standard, largest size supplied.
3-Zone 1200°C Tube Furnace w/ Kanthal (Sweden) Heating Elements 2-Zone 1700°C Tube Furnace with Vacuum Flanges & Alumina Tube Mitsubishi refractory lining, Shimaden 40-seg PID controller, overheat/power failure protection, PC interface, vacuum flanges, 2 quartz tubes incl. UL/CSA available.
The single zone and 3-zone split tube furnaces have a maximum operating temperature of 1200 °C. All models are available with maximum heated lengths of either 9000 mm or 12000 mm. The angle of inclination can be easily adjusted between horizontal and 15 °. A safety switch automatically prevents heating when the furnace is opened.
Types F79500 & F79600 Three-Zone Tube Furnaces OPERATION MANUAL AND PARTS LIST SERIES 1082 & 1083 Model Voltage Heating Zone Control F79520 240 8" (20.32) Single Set Point Auto F79520-33 240 8" (20.32) Single Set Point F79528 208 8" (20.32) Single Set Point Auto F79530-70 240 8" (20.32) Program. 2 ramp/2 dwell
Other sizes and multiple-heat-zone furnaces supplied on request Furnaces must be oriented vertically; see page 12 for horizontal high-temperature tube furnace options Heating elements: Kanthal Super® (MoSi 2) Note: These furnaces operate at low voltage and high current, requiring a transformer and current-limiting device in the control system
Split tube for convenience, three zones for control! 1200°C max temperature. Available with three 8" or 12" zones. Can be run vertically with optional stand. Product Description. Create precise thermal gradients for your process tubes. Available with three 8" or 12" zones. Unitized construction design conserves shrinking lab space.
Description of the two zone rotary tube furnace: This is a two zones rotary tube furnace, designed for calcining inorganic compound with better uniformity, especially good for preparing Li-Ion battery cathode materials with conductive coatings, such as LiFePO3, LiMnNiO3, etc and rotating CVD for Si/C anode materials.
Wax Burnout Furnace; Tube Furnace. Mini Tube Furnace; Ordinary Tubular Furnace; Sliding tube furnace; Multi-zones Tube Furnace; Inclined rotary tube furnace; Vertical Tube Furnace; High Temperature High Pressure Tube Furnace; RTP Tube Furnace; Film Preparation Equipment. CVD System; PECVD System; Plasma Coating; Spin Coater; Induction furnace
OTF-1200X-II-UL is a CE Certified and ready to pass UL/CSA certification (details please refer to specification below) furnace with optional quartz Tube (60, 80, 100mm) & Vacuum Flanges. Split two-zone tube furnace which can achieve faster heating up to 1200 o C and