Centorr Vacuum Industries, 55 Northeastern Blvd., Nashua, NH 03062 USA Fax: 603‐595‐9220 Key Features Cold Wall Vacuum furnace design with stainless steel inner jacket and carbon steel outer jackets on the vessel and doors, with rod‐baffled water cooling for long service life.
However, because the typical temperature in the vacuum furnace is below than 1500°C, the molybdenum has been approved to be the most promising material to explore in further as furnace components. The vacuum or high temperature furnace parts made of molybdenum include but are not limited to the following types:
furnaces, magnetic field thermo-processing furnaces, vacuum furnaces, continuous ceramic sintering furnaces and other various furnaces and strongly supports techno-frontier industries. As one of the major manufacturers of heating wires used for these furnaces, Riken Environmental System offers heating materials for a.
Strict vacuum sealing: As everyone knows, vacuum heat treatment of metal parts is carried out in a closed vacuum furnace. Therefore, the original air leakage rate of the furnace is obtained and maintained, and the working vacuum of the vacuum furnace is ensured.
We can supply graphite rods, graphite blocks with stable and reliable quality. We can supply large amount of graphite rods, graphite blocks, graphite tubes, graphite pipes, cut-off plates and other graphite products. We have all grades of materials availabe: Isostatic graphite, Molded graphite, Extruded graphite, Vibration graphite.
Essentially, tungsten carbide (WC) is a composite material manufactured by a process called powder metallurgy. Tungsten carbide powder, generally ranging in proportion between 70%-97% of the total weight, is mixed with a binder metal, usually cobalt, compacted in a die and then sintered in a furnace.
Tungsten Carbide Rods We are leading producer and stockist of Tungsten Carbide Rods in China. Ground Drill Blanks with Point, Slot and Helical Coolant Holes(30°) Tungsten Carbide Rods Application: Drill with Helical Coolant Holes Tungsten Carbide Rods Advantages: Reduce time for point and slot
In the field of electrical resistance heating, a variety of materials are available for use as heating elements. They include METALLIC ALLOYS (Nickel-chrome, Iron-Chrome-Aluminum, Tungsten, Molybdenum, and Tantalum), CERAMIC MATERIALS (Silicon Carbide, and at one time Zirconium Oxide), CERAMIC METALS (Molybdenum Disilicide,
Tungsten carbide dies. Tungsten carbide dies was made of tungsten and cobalt carbide, having dozen times even several ten times longer working time than steel die with advantages of high hardness, high strength, corrosion resistance, high temperature resistance and low expansion coefficient.
Tungsten is used for heating elements in vacuum furnaces that exceed the temperatures of molybdenum and tantalum as well as other heater applications. Tungsten has also gained wide acceptance as an essential material in electrical contacts, glass-to-metal seals, supports, and electrodes.
Manufacturer of stop-off coatings for both carburizing and nitriding. Supplier of boronizing powders and pastes. Supplier of heat fans, burner nozzles, stainless steel transfer chains. Distributor of alloy and silicon carbide radiant tubes, graphite insulation, and carbon-carbon composite plate for vacuum oven furniture.
Vacuum debinding furnace is mainly used for debinding process of tungsten, heavy alloy, moly alloy and cemented carbide materials. It can remove the binders like PEG, paraffin and rubber. Vacuum debinding tube furnace is also applied in debinding process of extrusion rod and press parts.
Cemented carbide vacuum sintering furnace working principle. The multi-atmosphere cemented carbide vacuum sintering furnace is composed of furnace body, insulation layer, heating element, furnace front transformer, distribution cabinet (including control system), vacuum pump, various connecting pipes and valves, etc.
ECDM has been studied for machining such insulating materials. The authors have proposed a deposition method of WC layer by electrical discharge machining (EDM) with a compressed WC-Co powder as an electrode. The improvement of removal rate is expected by combining wire-sawing with ECDM. A silica glass rod was cut with a saw wire with the WC layer.
Vacuum Debinding & Sintering Furnace Vacuum Heat Treatment Furnaces Vacuum Brazing Furnace Vacuum Induction Melting Furnaces Lab Vacuum Furnaces Vacuum Graphitizing Furnace And Carbonization Furnace Vacuum Hydrogen Furnace Vacuum Diffusion Brazing Furnace Vacuum Gas Quenching Furnace Vacuum Tempering Furnace Vacuum Annealing Furnace Vacuum Oil
Double-chamber High Pressure Gas Quenching Vacuum Furnace It is mainly suitable for high pressure gas quenching, vacuum sintering and vacuum brazing of cold and hot working die steel, high speed steel, elastic alloy, superalloy, stainless steel, titanium alloy, magnetic material and other materials.
Alibaba.com offers 16,318 tungsten sintering products. About 21% of these are tool parts, 3% are industrial furnace, and 1% are laboratory heating equipments. A wide variety of tungsten sintering options are available to you, such as sintering furnace, melting furnace, and heat treatment furnace.